Technical Specifications - BoomToneDJ Cyclone LZR Mode D'emploi

signs in accordance with the Ministerial Decree of 4 November 1993
"Signs of safety and health in the workplace" and the NF X 08-003
"Symbols graphics and symbols - colors and safety signs "of December
1994. This signaling is completed by the words of the class of laser
product and the instructions provided in the NF EN 60825-1 standard.
Such access can be controlled, at least when lasers are operating.
 Emissions control : the control panel should be placed outside the
locations exposed to hazardous emissions. The control of lasers in
Classes 3 and 4 should be under the control of a key control, removed
when the device is not in use and owned by a qualified person.
 Disclaimer : The use of this device is exclusively for professional
activities show and display.
 It is forbidden to allow projecting the beams to the audience and any
areas accessible by persons without appropriate eye and skin
protective items. It is forbidden to use this device for any other
purpose than that for which it is intended.
 It is forbidden to shine any laser beam to the aircrafts.
 If the laser is operated in a situation where health or property injury
may occur, operation MUST be stopped immediately!
 Manufacturer and distributors are not responsible for any damages
caused by use of BoomtoneDJ lasers. User is responsible for applying
conditions
EN60825-1:2014 and all locally applicable safety laws and regulations.

2- Technical Specifications


Power supply：AC100-240V 50/60Hz

Fuse：F3A/250V

Power Supply：IEC Input block

Light source：9W 3 in 1 RGB High Brightness LED + 1 Single Green Laser
532nm/50mw

Beam Angle: 4-60degrees

3 Modes : Automatic, Sound, DMX

DMX Channels：11/14/20/60 DMX channels

Dimensions ：L 240 × l 240 × H120mm

Gross Weight：5kg
of use according to regulations stipulated in
18