Taking A Blood Pressure Measurement - Beurer BM 49 Mode D'emploi

7.3 Selecting the memory
• Switch on the device with the
START/STOP button .
When the device is switched
off, the time and date are
permanently displayed.
• Select the desired user memory
by pressing the function
buttons .
You have 2 memories, each with
60 memory spaces to store the
measurements of 2 different people
separately.

7.4 Taking a blood pressure measurement

• As described above, attach the
cuff and adopt the posture in
which you want to perform the
measurement.
Voice output when voice function
is active
The device is ready for use.
You may start measuring.
User memory 1
User memory 2
Voice output when voice function
is active
• Switch on the device with the
START/STOP button
• A display check is performed,
during which all display segments
light up.
• Start the device with the
START/STOP button
. The memory space that will
be used is displayed.
The cuff is inflated to 190 mmHg.
The cuff's air pressure is slowly
released. If you already recognise
a tendency for high blood pres-
sure, you should reinflate the cuff
and increase the cuff's pressure
again. As soon as a pulse is de-
tected, the symbol flashes.
You can cancel the measure-
ment at any time by pressing
the START/STOP button
82
Voice output when voice function
is active
The device is ready for use.
. You may start measuring.
.