There are two different ways to access the menu from which you can
adjust the settings:
• Before initial use and after each time you replace the battery:
When you insert new batteries into the device, the display lights up and
the announcement described in the "6.1 Inserting the batteries" section
sounds in the relevant pre-set language. Press and hold the memory
button
for approx. 5 seconds.
• If the batteries have already been inserted:
When the device is in standby mode, press the START/STOP button
(date and time is displayed permanently).
All display segments light up briefly; immediately following this, the
announcement sounds in the language set by you. Press and hold
the memory button
for approx. 5 seconds.
In this menu you can adjust the following settings in succession:
Date
Time
➔ Language ➔ Volume
➔
The year flashes on the display.
• Set the year with the function
buttons
and confirm with the
memory button .
• Next, set the month, day, hour
and minute in the same way and
confirm each setting with the
memory button .
The language will flash on the
display
.
• You can select the following lan-
guages with the function buttons
:
= German
= French
= Italian
= Dutch
= Language off
Confirm your selection with
the memory button .
= Language off means
that there is no voice output
and therefore no acoustic
playback.
79
Voice output
The device is ready for use.
You may start measuring.
Deutsch
Français
Italiano
Nederlands