• The systolic pressure, diastolic
pressure and pulse rate
measurements are displayed.
Whilst the message is being
announced, the volume can
be adjusted with the function
buttons
.
•
appears if the measurement
could not be performed properly.
Observe the chapter on error
messages/troubleshooting in
these instructions for use and
repeat the measurement.
Voice output when voice function
is active
Systole ... mmHg
Diastole ... mmHg
Heart rate ... beats per minute
According to the WHO
guidelines your blood pressure
is
– optimal
– normal
– high to normal
– shows slight hypertension
– shows medium hypertension
– shows strong hypertension
• The measurement is
automatically stored.
• The device switches off
automatically after 1 minute.
Wait for at least 1 minute before taking another measurement.
7.5 Evaluating the results
Cardiac arrhythmia:
This device can identify potential disruptions of the heart rhythm when
measuring and, if necessary, indicates this after the measurement
with the symbol
. If the voice function is activated, the device will
announce: "A possible cardiac arrhythmia was found." This can be an
indicator for arrhythmia. Arrhythmia is an illness in which the heart rhythm
is abnormal because of flaws in the bioelectrical system that regulates the
heartbeat. The symptoms (skipped or premature heart beats, pulse being
slow or too fast) can be caused by factors such as heart disease, age,
physical make-up, excess stimulants, stress or lack of sleep. Arrhythmia
can only be determined through an examination by your doctor. If the
symbol
is shown on the display after the measurement has been
taken, repeat the measurement. Please ensure that you rest for 5 minutes
beforehand and do not speak or move during the measurement. If
the symbol
appears frequently, please consult your doctor. Self-
diagnosis and treatment based on the measurements can be dangerous.
Always follow your doctor's instructions.
83
Voice output when voice function
is active