Display Option - Parker Lucifer EPP4 Instructions D'installation

DISPLAY OPTION

This option should be used outside ATEX area.
Order No.: 496490
Compact and highly readable remote LED display, with bar and PSI scales.
Connection
- M12 connector on EPP B connector
- M8 connector on Display's connector
The display is ready to use.
For safe use, please ensure the connectors
are well mounted.
Specific Oxygen version ref P4CG4465.... Reminder on the oxygen use
This oxygen version reference is designed and assembled taking into account the general rules, the state of
the art, to be applied on components that will be used with oxygen for industrial applications.
This version is using only oxygen compatible materials, but the material type is not the only factor in a typical
self ignition process. Flow speed for example, is a very important factor, and should be limited to 25 m/sec in
the whole application (attention to valve restriction).
Filtration also should be carefully implemented and maintained (a filter partially blocked will increase the flow
speed).
The final user should be familiar with these general rules that must be applied for oxygen applications, and is
responsible of the real conditions of use of our regulators.
Bulletin 408283 R02 13.06.2013 - Part Nr. 497057
The display is delivered in its own packaging with
its specific manual.
1.5m cable included (M12 – M8)
Easy to fix with its 2 different mounting brackets.
- 8/24 -
EPP4 Pressure Regulator