Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Anleitung HKS 55 -4 sprachig
13.11.2001 13:38 Uhr
Description
1. Handle
2. Nameplate
3. On/Off switch (not visible)
4. Lock screwfor the depth of cut setting
5. Power cable
6. Splitter
7. Hinged guard hood
8. Hexagon-head bolt
9. Shoe
10. Flange
11. Saw blade
12. Parallel stop
13. Lock screw for the parallel fence
14. Lock screw for the mitre cuts
15. Dust extractor connection
16. Additional handle
Please read the operating instructions carefully and
observe the safety regulations at all costs.
Keep the operating instructions with the hand-held
circular saw.
Technical data
Voltage:
230 V ~ 50 Hz
Power rating:
No-load speed:
Cutting depth at 0°:
Cutting depth at 15°:
Saw blade max.:
160 mm dia.
Blade bore:
20 mm dia.
Saw blade thickness
Vibration a w
Sound pressure level:
LPA 98 dB(A)
Noise level:
LWA 101 dB(A)
Weight
Dimensions
33 x 22,5 x 22 cm
Features
Parallel stop
Safety regulations
Seite 7
Never use saw blades made of high-alloy, high-
speed steel (HSS).
Never use any saw blades that do not conform to
the specifications quoted in these operating
instructions.
Make sure that all the moving parts of the saw
guard work properly without jamming.
Make sure that all the devices which cover the
saw blade work properly.
The splitter must be used and correctly adjusted at
all times except for plunge cuts.
Never use the hand-held circular saw where there
are fumes or combustible liquids.
Use only sharp saw blades and suitable
accessories.
Always pull the plug out of the power socket
before converting or cleaning the saw.
Keep the power cable safe from damage. Oil and
acid can cause damage to the cable.
Never carry the saw by its power cable.
1020 W
Never remove the plug from the socket by pulling
4000 rpm
on the power cable.
52 mm
If the power cable needs to be replaced, call an
40 mm
electrician.
If you use a cable reel, the complete cable must
be drawn off the reel. The conductor must have a
minimum cross section of 1,5 mm
2,8 mm
3,2 m/s
2
Do not overload the machine.
Secure all workpieces properly.
Wear goggles and use a dust mask for jobs which
4,8 Kg
produce dust.
Wear ear muffs to protect your ears.
Wear suitable clothing (tight-fitting) and keep
sleeves closed.
Keep children away!
GB
2
.
7
Publicité
Table des Matières
