Setup Troubleshooting - Petsafe PFD19-16861 Guide De Démarrage Rapide

5. Download the My PetSafe
store. Open the app and follow the on-screen
instructions to connect to your feeder. You will need a
valid email address and your home Wi-Fi password.
Complete all instructions and app setup before filling the
feeder with food.
6. Fill the hopper with your pet's favourite dry or semi-moist
food. Level the food, and replace the lid.
7. Prime the feeder by pressing and holding the manual
feed button until the food starts to dispense into the bowl
or use the "Feed Now" feature in the app.
Note: The feeder conveyor must be primed anytime the
food gets low to ensure that the correct meal sizes
are dispensed.
Your Smart Feed Automatic Pet Feeder is now ready for
use! Use the Smart Feed app to schedule meals and set
up notifications.

Setup Troubleshooting

If you went through the setup process and were unable to get your feeder connected, first try the instructions within the
app. If you are still having issues, then try the steps below:
1. Ensure that your home Wi-Fi is working properly and your phone is connected to it.
2. Place your feeder near your router during initial setup.
3. If you are an Android user, make sure to select "stay connected" to your Wi-Fi during setup. Or if you receive a
"no internet access" notification, open it to reconnect to your Wi-Fi.
6
app from your phone's app
®
petsafe.com
Get Started
Or Login