Denon AVR-1604 Mode D'emploi page 44

ENGLISH
5
(Remote control unit)
(Remote control unit)
6
(Remote control unit)
(Remote control unit)
7
(Remote control unit)
(Remote control unit)
8
(Remote control unit)
(Remote control unit)
9
(Remote control unit)
(Remote control unit)
44
Use the (left) and (right) buttons to set the CINEMA EQ.
CINEMA EQ OFF
Press the SURROUND PARAMETER or
Use the (left) and (right) buttons to set the D. COMP.
D.COMP.
Press the SURROUND PARAMETER or
NOTE:
This parameter is not displayed during DTS playback.
Use the (left) and (right) buttons to set the LFE level.
LFE
• The level can be adjusted in units of 1 dB from –10 to 0 dB.
Set to the desired level according to the speaker systems being used and the source to be played.
Press the SURROUND PARAMETER or
Use the (left) and (right) buttons to set the TONE DEFEAT.
TONE DEF.
Press the SURROUND PARAMETER or
setting.
Use the (left) and (right) buttons to set the SURROUND BACK SPEAKER.
SB:ON
Press the SURROUND PARAMETER or
ON OFF
(left) button (right) button
(down) button to switch to the D. COMP. setting.
(Initial)
OFF LOW
OFF
(left) button
(down) button to switch to the LFE setting.
-10dB -5dB
0dB
(left) button
(down) button to switch to the TONE DEFEAT setting.
(Initial)
ON OFF
ON
(left) button (right) button
(down) button to switch to the SURROUND BACK SPEAKER
(Initial)
ON OFF
(left) button (right) button
(down) button to switch to the default setting.
(Initial)
MID HIGH
(right) button
(Initial)
0dB
(right) button