Denon AVR-1604 Mode D'emploi page 12

ENGLISH
Connecting a Video Component Equipped with Color Difference (Component - Y, P
P /C ) Video Jacks (DVD Player)
B B
• When making connections, also refer to the operating instructions of the other components.
• The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack.
In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video
jacks.
• Some video sources with component video outputs are labeled Y, C
color difference output.
COMPONENT
VIDEO OUT
Y C
B
12
DVD player
B
C
R
Monitor TV
COMPONENT
VIDEO IN
Y C C
B R
, C , or Y, Pb, Pr, or Y, R-Y, B-Y. These terms all refer to component video
B R
Connecting a DVD player
DVD IN jacks
• Connect the DVD player's color difference (component) video output jacks
(COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75 Ω/ohms
coaxial video pin-plug cords.
• In the same way, another video source with component video outputs such as a
TV/DBS tuner, etc., can be connected to the TV/DBS color difference (component)
video jacks.
Connecting a monitor TV
MONITOR OUT jack
• Connect the TV's color difference (component) video input jacks (COMPONENT
VIDEO INPUT) to the COMPONENT MONITOR OUT jack using 75 Ω/ohms coaxial
video pin-plug cords.
• The color difference input jacks may be indicated differently on some
TVs, monitors or video components ("C
"Pr, Pb and Y", etc.). For details, carefully read the operating
instructions included with the TV or other component.
/C ,
R R
, C and Y", "R-Y, B-Y and Y",
R B