Denon AVR-1604 Mode D'emploi page 43

Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 25).
Example: DVD
(Main unit)
w Set the input mode to "AUTO" or DTS.
(Main unit)
2 Select the Dolby/DTS Surround mode.
(Main unit)
3
Play a program source with the
• The Dolby Digital indicator lights when
DIGITAL
playing Dolby Digital sources.
Light
• The DTS indicator lights when playing
DTS sources.
Light
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFF.
(Main unit)
• Lights when the Surround Back CH is
on.
Light
4
Set the surround parameter according to the source.
First, press the SURROUND PARAMETER button.
(Remote control unit)
NOTE:
Please make sure the "AUDIO" position of the slide switch
on the remote control unit.
(Remote control unit)
(Remote control unit)
(Remote control unit)
, mark.
5, 6, 7, 8, 9, 10
5, 6, 7, 8, 9, 10
(Remote control unit)
1 1 3
3 2
2
1
11
1
ENGLISH
4, 5, 6, 7, 8, 9, 10
5, 6, 7, 8, 9, 10
3
43