Denon AVR-1604 Mode D'emploi page 41

2 Select the DTS NEO:6 mode.
(Main unit)
• The mode switches as shown below each time the button
is pressed.
DOLBY PL
3 Play a program source.
4 Select the surround parameter mode.
(Main unit) (Remote control unit)
To perform this operation from the remote control unit,
check that the mode selector switch is set to "AUDIO".
5 Select the optimum mode for the source.
(Main unit)
MODE cinema
or
6 Set the surround parameters according to the mode.
(Main unit)
• The mode switches as shown below each time the button
is pressed.
MODE CINEMA
CINEMA EQ
TONE DEFEAT
SURROUND BACK
DEFAULT
If you do want the bass and trable to be adjusted, turn off
the tone defeat mode.
(Remote control unit)
II cinema
DTS NEO:6
Display
MODE cinema
(Remote control unit)
MODE music
or
(Remote control unit)
MODE MUSIC
CENTER IMAGE
TONE DEFEAT
SURROUND BACK
DEFAULT
7 Set the various surround parameters.
• CINEMA EQ setting
CINEMA EQ OFF
ON
or
• CENTER IMAGE setting
C.IMAGE 0.2
0.0
or
• TONE DEFEAT setting
TONE DEF.
ON
or
• SURROUND BACK SPEAKER setting
SB:ON
ON
or
• DEFAULT setting
DEFAULT
YES
or
Select "Yes" to reset to the factory defaults.
8 Press the ENTER button to finish surround parameter mode.
(Remote control unit)
ENGLISH
OFF
or
0.2 0.5
or
ON
OFF
or
OFF
or
Y/N
Y/N NO
or
41