Chapter 4 : Front Panel Display Menus Description; Device Status; Output Status - Analog way VIO 1600 Manuel Utilisateur

Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION

4-1. INTRODUCTION
The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the device.
• The CONTROL MODE allows selecting and adjusting the parameters of the device.
4-2. CONTROL BUTTONS
The front panel display is controlled by 2 buttons and 1 knob:
knob:
EXIT / MENU button:
ENTER button:
4-3. STATUS MODE
When switching ON, the front panel display shows the product's name and firmware versions as follows:
DEVICE NAME
DEVICE VERSION
OUTPUT RATE MODE.
OUTPUT FORMAT.
OUTPUT FRAME RATE.
SELECTED INPUT.
INPUT FORMAT OR INPUT STANDARD.
INPUT LINE / FRAME FREQUENCY.
PAGE 16
• In the CONTROL MODE, turn this knob to scroll thru the different menus.
• In the STATUS MODE, press this button to enter in the CONTROL MODE.
• In the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
• From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
VIO1600
Version _._
OUTPUT
intern rate
INPUT # 1
SVGA 37.9 K / 60Hz
XGA
60 Hz
VIO1600 & ULTRA VIO

DEVICE STATUS

OUTPUT STATUS

INPUT STATUS