Chapter 2 : Technical Description - Analog way STUDIO SCAN XTD825 Manuel Utilisateur

STUDIO SCAN XTD825 / 625™

Chapter 2 : TECHNICAL DESCRIPTION

2-1. FRONT PANEL
FREEZE:
ADJUSTMENTS
UNDER - OVER - ZOOM: Underscan, Overscan or Zoom mode selection.
POS:
H:
V:
SIZE:
LCD CONTROL
:
EXIT MENU:
ENTER:
ON / OFF:
2-2. REAR PANEL
POWER INPUT:
REMOTE CONTROL:
COMPUTER INPUT:
RGB Hi-Z / 75 Ω:
MONITOR OUTPUT:
GENLOCK
IN:
OUT:
OUTPUTS
ANALOG OUT:
R, G, B, S:
R-Y, Y, B-Y:
S.VIDEO:
COMPOSITE:
SDI OUT (OPTIONAL):
Allows to freeze the displayed image.
Position mode selection.
Horizontal Image adjustment.
Vertical Image adjustment.
NOTE: H and V knobs act on the position or size of the image according to the
selected POS/SIZE mode.
Size mode selection.
Allows to select items in the LCD menu.
Allows to exit from a LCD menu.
Allows to validate a selected item.
AC power switch (O = OFF, I = ON).
Standard IEC Connector (100-250VAC, 50-60Hz Automatic).
Standard RS-232, DB9 female connector.
Analog computer input on HD15 female connector.
Digital computer input on DVI-I female connector (available in option on XTD825 &
XTD825-D1 version).
RGB input load. Set this button on Hi-Z if you connect a monitor on the MONITOR
OUT connector. If not set it on 75 Ω.
Analog computer output (loopthrough) on HD15 female connector.
Digital computer output (loopthrough) on DVI-I female connector (available in option
on XTD825 & XTD825-D1 version).
GENLOCK input.
GENLOCK output (loopthrough).
RGB/S or RGsB video outputs (on 3 or 4 BNC connectors).
Component video output (on 3 BNC connectors).
S.VIDEO outputs (4-pin mini DIN connector).
Composite video outputs (1 BNC connector).
Optional SDI (4:2:2) output (on 1 BNC connector).
PAGE 7