Analog way VIO 1600 Manuel Utilisateur page 21

VIO1600 & ULTRA VIO
4-5. FUNCTIONS DESCRIPTION (continued)
3 [IMAGE] + ENTER.
NOTE: The image menu contents will be different in case of input & output type selected.
3-1 [centering] + ENTER.
Adjust automatically the image in the centering pattern.
3-2 [pos. settings] + ENTER.
Select one of the following function with
3-2-1 [H position] + ENTER.
Adjust the Horizontal position with
3-2-2 [V position] + ENTER.
Adjust the Vertical position with
3-2-3 [H size] + ENTER.
Adjust the Horizontal size with
3-2-4 [V size] + ENTER.
Adjust the Vertical size with
3-3 [aspect in] + ENTER.
Select the Aspect Ratio of your input source with
• [4/3 standard]: 4/3 input format.
• [16/9 letterbox]: Letterbox input format.
• [WS anamorphic]: Widescreen Anamorphic input format (video) or 16/9 input format (computer).
3-4 [aspect out] + ENTER.
Select one of the following output aspect ratio with
• [standard]: The entire image and the aspect ratio are preserved.
• [crop]:
• [full screen]: The image is stretched to fill the screen. The aspect ratio is not preserved.
• [custom]: The image can be zoomed, cropped and stretched at your convenience.
• If the selected input is a VIDEO signal the IMAGE MENU displays the following items:
3-5 [brightness] + ENTER.
Adjust the brightness with
3-6 [contrast] + ENTER.
Adjust the contrast with
3-7 [color] + ENTER.
Adjust the color with
3-8 [hue] + ENTER.
Adjust the tint of the picture (NTSC only) with
3-9 [u / over scan] + ENTER.
Select Underscan or Overscan with
• [underscan]: Underscan mode. The entire image is visible on the screen. Computer mode is underscan.
• [overscan]: Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid seeing
3-10 [preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with
ENTER.
The image is zoomed without deformation to fill the screen, but some borders of the image will be
cropped. The aspect ratio is preserved.
+ ENTER.
+ ENTER.
+ ENTER.
the corners and the borders. Standard TV display mode is overscan.
Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
PAGE 21