Analog way VIO 1600 Manuel Utilisateur page 12

Chapter 2 : STARTING (continued)
2-3. INPUT #2 DESCRIPTION
CONNECTION:
You can connect to this input one of the following source:
• A composite video source on the C.V BNC connector or on the COMPUTER/TV/HDTV HD15 (bottom)
connector.
• A S.VIDEO source on the HD15 (bottom) connector.
• A Component video source on the COMPUTER/TV/HDTV HD15 (bottom) connectors.
• A HDTV source on the COMPUTER/TV/HDTV HD15 connectors.
NOTE: The VIO1600 & ULTRA VIO accept the 720p and 1080i HDTV formats.
• A RGBS source on the COMPUTER/TV/HDTV HD15 (bottom) connector.
• An analog computer source (RGBHV, RGsB, RGBS) on the COMPUTER/TV/HDTV HD15 connector.
• A SDI or HDSDI source on the (HD)SDI BNC connector (V301-ID1 version only).
LOOP-THROUGH:
You can connect a control monitor to the loop-through connectors (top BNC & HD15 connectors).
INPUT #2 CONNECTION DIAGRAM:
HD15 PIN ASSIGNMENT:
SIGNAL COMPUTER (analog)
PIN 1 RED.
PIN 2 GREEN.
PIN 3 BLUE.
PIN 6 RED return.
PIN 7 GREEN return.
PIN 8 BLUE return.
PIN 10 GND.
PIN 13 H sync or C sync (S).
PIN 14 V sync.
AUDIO SOURCE:
You can also connect an AUDIO stereo source on jack 3.5 connector.
PAGE 12
VIDEO RGB/S YUV & HDTV (analog)
RED. Cr / Pr.
GREEN. Y.
BLUE. Cb / Pb.
RED return. Cr / Pr return.
GREEN return. Y return.
BLUE return. Cb / Pb return.
GND.
C sync (S).
OUTPUTS
S.VIDEO (Y/C)
C (chrominance).
Y (luminance).
C return.
Y return.
HD15 female connector of the device.
VIO1600 & ULTRA VIO
COMPOSITE VIDEO
VIDEO (NTSC, PAL...)
return.
1
5
10
6
15
11