Quick Start Guide - Ultra Vio Tm - Analog way VIO 1600 Manuel Utilisateur

ANALOG WAY
CONNECTIONS:
Turn OFF all of your equipment before connecting.
Connect the AC power supply cord to the ULTRA VIO and to an AC power outlet.
Connect your computer & video sources to the 3 universal inputs of the ULTRA VIO.
- If you need to connect a digital computer source, use the input #1 (DVI-I IN connector).
- If you need to connect a SDI or HDSDI video source, use the input #2.
- Connect your others sources to the unused inputs.
IMPORTANT: Connect only one source by input.
Connect your Hi-Resolution display device (projector, plasma screen...) to the HD15 or BNC connectors, or connect your video
display device (TV, VCR...) to the C.V, Y/C or RGB connectors, or connect your DVI display device to the DVI-I connector, or
connect your digital display device to the (HD)SDI BNC connector.
IMPORTANT: Connect only one display device to the output.
Turn ON the ULTRA VIO (front panel switch). Then turn ON all your input sources, and then your display device.
• ULTRA VIO connection diagram:
2
3
• HD15 connector pin assignment (inputs #2 & #3 - input #1 with the DVI/HD15 adaptor)
SIGNAL COMPUTER (analog)
PIN 1 RED.
PIN 2 GREEN.
PIN 3 BLUE.
PIN 6 RED return.
PIN 7 GREEN return.
PIN 8 BLUE return.
PIN 10 GND.
PIN 13 H sync or C sync (S).
PIN 14 V sync.
SETTINGS:
We recommend resetting the ULTRA VIO device to all of its default values, with the front panel display menu (CONTROL >
default value > yes) before proceeding.
Select the input type connected to the INPUTS with the front panel display menu (INPUT > input type).
Select the output type & format which corresponds to your display with the front panel display menu (OUTPUT > output type).
Select one of the output rate available with the front panel display menu (OUTPUT > output rate).
For computer source, select the output sync type with the front panel display menu (OUTPUT > output sync).
Display the grid pattern with the front panel display menu (OUTPUT > test pattern > grid), and display a black output.
Adjust directly the display device itself, using its position and size controls, to fill the grid pattern in full screen.
Display the centering pattern (OUTPUT > test pattern > centering).
For each input source connected to the ULTRA VIO, make the following adjustments:
- Select the source you want to adjust (with the front panel "INPUT SELECTION" buttons).
- Select the aspect ratio of your input source with the front panel display menu (IMAGE > aspect ratio in).
- Press the Image Centering front panel button to automatically position the image in the Centering pattern.
IMPORTANT: For best results, display a full size bright image (no black border) to perform a centering. If necessary, correct the
adjustment with the position & size functions (IMAGE > pos settings).
NOTE: The centering function is only available for computer sources.
- If needed, make the others adjustments, available in the IMAGE menu (color, brightness...).
QUICK START GUIDE - ULTRA VIO
3
RGB/S VIDEO
RED.
GREEN.
BLUE.
RED return.
GREEN return.
BLUE return.
GND.
C sync (S).
OUTPUTS
3
YUV & HDTV (analog)
Cr / Pr. C (chrominance).
Y. Y (luminance).
Cb / Pb.
Cr / Pr return. C return.
Y return. Y return.
Cb / Pb return.
TM
4
ULTRA
Versatile Converter
:
S.VIDEO (Y/C) COMPOSITE VIDEO
VIDEO (NTSC, PAL...)
return.
1
5
10
15
11
EDITION : 06/05
5
6