Analog way VIO 1600 Manuel Utilisateur page 11

VIO1600 & ULTRA VIO
2-2. INPUT #1 DESCRIPTION
CONNECTION:
You can connect to this input one of the following source:
• A composite video source on the C.V BNC connector or on the DVI-I (IN) connector.
• A S.VIDEO source on the Y and C BNC connectors or on the DVI-I (IN) connector.
• A Component video source on the R-Y, Y and B-Y BNC connectors or on the DVI-I (IN) connector.
• A HDTV source on the R-Y, Y and B-Y BNC connectors or on the DVI-I (IN) connector.
NOTE: The VIO1600 & ULTRA VIO accept the 720p and 1080i HDTV formats.
• A RGBS source on the R, G, B and H/Cs BNC connectors or on the DVI-I (IN) connector.
• An analog (RGBHV, RGsB, RGBS) computer source on the BNC connector or on the DVI-I (IN) connector.
NOTE: You can use the DVI / HD15 adaptor provided with the device to connect analog sources on the DVI-I (IN)
connector.
• A digital computer source on the DVI-I (IN) connector.
LOOP-THROUGH:
You can connect a control monitor to the DVI-I (LOOP) connector. This connector can be used as well with analog
sources connected to the BNC inputs using the DVI / HD15 adaptor provided with the VIO1600/ULTRA VIO.
INPUT #1 CONNECTION DIAGRAM:
DVI-I PIN ASSIGNMENT:
The three DVI-I female connectors of the VIO1600/ULTRA VIO can be used with digital signals as well as analog
signals. The table hereafter explain the pin assignment of these connectors.
Pin Function
1 TMDS Data 2-
TMDS Data 2+
2
3 TMDS Data 2 Shield
4 Not used.
Not used.
5
6 DDC Clock
7 DDC Data
8 Analog Vertical Sync.
C1 Analog Red video (or Cr / Pr or C)
C2 Analog Green Video (or Y or composite video)
Analog Bleu Video (or Cb / Pb)
C3
C4 Analog Horizontal Sync (or composite sync)
C5 Analog Common Ground Return
DDC = Display Data Channel.
TMDS = Transition Minimized Differential Signal.
AUDIO SOURCE:
You can also connect an AUDIO stereo source on 2xRCA connectors.
Pin Function
9 TMDS Data 1-
TMDS Data 1+
10
11 TMDS Data 1 Shield
12 Not used.
Not used.
13
14 + 5V (Power)
15 Ground for (+5V)
16 Hot plug detect.
Chapter 2 : STARTING (continued)
Pin Function
17 TMDS Data 0-
TMDS Data 0+
18
19 TMDS Data 0 Shield
20 Not used.
Not used.
21
22 TMDS Clock Shield
23 TMDS Clock+
24 TMDS Clock-
8
1
9
16
17
24
C1 C2
C5
C3 C4
PAGE 11