Analog way VIO 1600 Manuel Utilisateur page 22

Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
4-5. FUNCTIONS DESCRIPTION (continued)
• If the selected input is a COMPUTER signal the IMAGE MENU displays the following items:
3-5 [black level] + ENTER.
Adjust the black level with
3-6 [color] + ENTER.
Select a color (Red, Green, or Blue) with
3-7 [optimize] + ENTER.
Select an item with
• [clock]: Manual adjustment of the pixel clock.
• [phase]: Manual adjustment of the pixel phase.
3-8 [flicker filter] + ENTER. (If the selected output type is SDTV or HDTV)
Adjust the level of anti-flicker
3-9 [preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with
ENTER.
[AUDIO] + ENTER.
4
4-1 [master volume] + ENTER.
Adjust the audio output level with
4-2 [audio source] + ENTER.
Select an item with
• [auto follow]: The audio follows the video image.
• [input --]: The selected audio input (is permanently diffused).
4-3 [audio level] + ENTER.
This function allows adjusting the level of the selected (diffused) audio source. Adjust the level with
ENTER.
4-4 [audio balance] + ENTER.
This function allows adjusting the balance of the selected (diffused) audio source. Adjust the level with
ENTER.
4-5 [mono ON] + ENTER.
Select ON to have a mono audio output.
4-6 [mute ON] + ENTER.
Switch ON or OFF the audio output. Validate with ENTER.
PAGE 22
+ ENTER.
+ ENTER and adjust the level with
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER:
VIO1600 & ULTRA VIO
+ ENTER.
+
+