Cleaning Pads; Ptfe Clamp Rings; Carbon Fiber Brush And Micro-Wand Kit; Large Graphite Insert - Walter Surface Technologies MINI SURFOX Manuel De L'utilisateur

8
Accessories
C) Cleaning pads
Cleaning pads are made of a complex blend of highly
conductive synthetic polymer which is very resistant to wear
and which offers excellent thermal stability. For longer life,
remove the cleaning pad and neutralize with SURFOX-N at
the end of each working day.
Features
• Flexible: Can be folded many ways
• Soft on surfaces
• Can be used both sides
• Long lasting
• Highly conductive (4x more conductive
than previous generation)
D) PTFE clamp rings
PTFE clamp rings are designed to hold the cleaning pads on
the tungsten inserts.
They are available in two sizes:
Narrow clamp ring for narrow pads
No: 54-B 020
Use with narrow inserts. 10 per package.
Clamp ring for cleaning pads
No: 54-B 002
Use with standard inserts. 10 per package.
12
Cleaning pads are available in three sizes:
Standard cleaning pad
No: 54-B 026
Dimensions: 46 mm L x 24 mm W x 4 mm T
USE WITH:
Inside corner cleaning pad
No: 54-B 027
Dimensions: 60 mm L x 38 mm W x 2 mm T
USE WITH:
Narrow cleaning pad
No: 54-B 028
Dimensions: 46 mm L x 24 mm W x 2 mm T
USE WITH:
E) Carbon Fiber brush and micro-wand kit
with carbon fiber brush
Carbon fiber brush
No: 54-B 157
To be mounted
on Micro-wand
5 per package.
Micro-wand kit
No: 54-B 133
With carbon fiber brush
for cleaning corners and
intricate areas.
F) Large graphite insert
No: 54-B 048
For small surface renewing and
cleaning the back of MIG welds.
Use with inside corner cleaning pad.
No: 54-B 051
Pad for large graphite insert.
54-B 036
54-B 036
54-B 038
Spare Adaptor
For mini-wand carbon
fiber brush
No: 54-B 150