Assembly - Ninja Coffee Bar CF097 Série Guide D'utilisation

Assembly

Fig. 5
Fig. 8
1 Place the brewer on a dry, clean and level surface.
2
To easily fill the water reservoir, use the hand grips
to lift the reservoir to the right and up off the brewer.
(Fig. 5) The water reservoir lid flips open for easy
filling, and the entire lid is easily removable for quick
cleaning. Add fresh, filtered water at or above the
minimum fill line for your desired beverage size (Fig. 6),
then return the water reservoir to the brewer by angling
the reservoir into the holder and pushing in towards
the brewer to lock into place. (Fig. 7) Do not fill water
reservoir with any other liquids such as brewed coffee,
carbonated beverages, etc. as other liquids may
damage your brewer.
Fig. 6
Fig. 9
3 Slide brew basket out (Fig. 8) and lift both the
permanent filter and Removable Filter Holder from the
brew basket to remove. (Fig. 9) To reinsert, set the
permanent filter and Removable Filter Holder back into
the brew basket. (Fig. 10) When cleaning, you can
remove the permanent filter from the brew basket.
4 Once the filter is in place, slide the brew basket all the
way in until you hear a slight click.
Fig. 7
Fig. 10
ninjakitchen.com
10