Assembly - Ninja CF080C Manuel Du Propriétaire

Assembly

Fig. 4
Fig. 4a
1 Place the brewer on a dry, clean and level surface.
2
Holding the water reservoir by the grip, twist
counterclockwise to remove. (Fig. 4) Either flip
the lid top over (Fig. 4a) or remove lid by twisting
counterclockwise to remove (Fig. 4b). Fill with water
up to, but not exceeding the Max fill line (1.25 L). To
replace the water reservoir, place on top of the base
and twist clockwise until a click indicates it is locked in
place.
AM
H
PM
M
PROG
STAY WARM/
GARDEZ CHAUD
BREW / INFU
SION
CLAS SIC/C
LASS IQUE
RICH / RICH
E
OVER ICE /
SUR GLAC
E
SPEC IALTY
/ SPÉC IALIT
(CONCEN TRATED É
/ CONCEN TRÉE)
CLEAN/
NETTOY ER
Fig. 4b
Fig. 5
Fig. 6
3 Slide brew basket out and angle up slightly to remove
it from the brewer. (Fig. 5) To reinsert, align the brew
basket with the rails and slide back into the brewer.
(Fig. 6)
4 Once the brew basket is in place, slide all the way into
place until you hear a slight click.
AM
H
PM
M
PROG
STAY WARM/
GARDEZ CHAUD
BRE W/ INFU
SION
CLA SSIC /CLA
SSIQ UE
RICH / RICH
E
OVE R ICE /
SUR GLA CE
SPEC IALTY
/ SPÉC IALIT
(CONCE NTRATE É
D / CONCEN
TRÉE)
CLEAN /
NETTO YER
12
ninjakitchen.com