List Of The Service Parameters - FEIG Electronic MWD BPC-H Mode D'emploi

FR

9.2 List of the service parameters

When starting parameter mode, the channel to be edited or parameterized must first be selected (see Table
5 on page 40). For editing the convenience profiles see also Table 6 on page 41.
No channel needs to be selected for reading the serial number and setting the comfort profiles.
Table 15: Parameters
P. [Unit]
Range
P.B41
P.B48
P.B51
P.B58
1 ... F
P.B81
P.B88
P.B91
P.B98
P.B42
P.B49
P.B52
P.B59
0 ... 2
P.B82
P.B89
P.B92
P.B99
P.B43
P.B4A
P.B53
P.B5A
P.B83 0 ... 6
P.B8A
P.B93
P.B9A
P.B44
P.B4B
P.B54
P.B5B
P.B84 0 ... 6
P.B8B
P.B94
P.B9B
FEIG ELECTRONIC GmbH
Use with older controllers
Function Description/Note
This parameter defines the sensitivity of the channel to be
parameterized.
Sensitivity
This parameter specifies whether the motion detector
reacts to approaching or departing objects.
Detection
direction
approaching detection direction is allowed!
Modifications to the detection direction setting will
then be blocked.
This parameter specifies the probability with which
exclusively persons and not vehicles are detected.
Human filter
This parameter specifies the probability with which
exclusively vehicles and not persons are detected.
Vehicle filter
complex movings detected, there can appear in some
cases dysfunctions in the vehicle filter.
50/74
1: low
...
F: high
0: both directions
1: approaching
2: departing
If the vehicle or human filter is activated, only the
0: deactivated
1: low (persons and vehicles)
....
4: medium
....
6: high (only certainly detected humans)
The human filter can only be activated if the
approaching detection direction has been set.
Because there are many different objects with
complex movings detected, there can appear in some
cases dysfunctions in the human filter.
0: deactivated
1: low (vehicles and persons)
....
4: medium
....
6: high (only certainly detected vehicles)
The vehicle filter can only be activated if the
approaching detection direction has been set.
Because there are many different objects with
MWD_BPC-H-HU_ver4_Manual_rev0_mul
MWD BPC-H / MWD BPC-HU