Safety; Target Group; General Information About This Document - FEIG Electronic MWD BPC-H Mode D'emploi

EN
2

Safety

2.1 Target group

This manual is specifically addressed to the commissioning technicians of the MWD BPC-H/-HU Motion
Detector from FEIG ELECTRONIC GmbH.
The commissioning of the motion detector must only be performed by qualified electricians who are familiar with
the safety standards of electrical automation technology.
The supplier of the MWD BPC-H/-HU Motion Detector is exclusively responsible for the completeness of the
manual.

2.2 General information about this document

Be sure to read this manual before operating, connecting, or operating the unit.
The following symbols are used in this function description to alert the user to various hazards and useful tips.
WARNING
alerts to a possible hazard to
persons if the procedure is not performed as
described.
CAUTION
alerts to possible damage to the
device.
FEIG ELECTRONIC GmbH
Safety
alerts to information which is important to
the function of the device.
refers to useful information which is useful
but not absolutely necessary for using the device.
32/74
MWD BPC-H / MWD BPC-HU
MWD_BPC-H-HU_ver4_Manual_rev0_mul