List Of The Service Parameters; Motion Detector - FEIG Electronic MWD BPC-H Mode D'emploi

EN
7

List of the service parameters

When starting parameter mode, the channel to be edited or parameterized must first be selected (see Table 5
on page 40). For editing the convenience profiles see also Table 6 on page 41.
No channel needs to be selected for reading the serial number and setting the comfort profiles.

7.1 Motion detector

Table 7: Motion detector parameters
[Unit]
P.
Range
L.600 0 ... 4
L.700
L.800
L.900
L.601
L.701
L.801
L.901
L.602 0 ... 1
L.702
L.802
L.902
L.606 0 ... 1
L.706
L.806
L.906
L.61F 0001 ...
L.71F 0006
L.81F
L.91F
L.660
L.760
L.860
L.960
FEIG ELECTRONIC GmbH
List of the service parameters
Function
Activation Motion
detector
MWD BPC Motion
detector Assignment
Deactivation Motion
detector
Behaviour in case of
missing device
Profile for Motion
detector
Serial number Motion
detector
42/74
Description/ Note
This parameter is used to activate motion detector.
3: MWD BPC
This parameter explicitly assigns a serial number of a
connected motion detector to the MWD BPC motion
detector 1,2,3 or 4.
The lowest four digits of the serial number are displayed
and the currently selected sensor flashes with its LEDs.
This parameter can be used to temporarily deactivate
motion detector.
0: Motion detector inactive
1: Activated
This parameter is used to set the behaviour when a motion
detector is missing.
0: Error message if detector is not available
1: No error messages. Motion detectors will be
taught-in when they are connected.
This profile sets all associated parameters of motion
detector.
0001: Default values for motion detector 1
0002: Channel 1 all settings, channel 2 deactivated
0003: Channel 1 all, channel 2 deactivated, sensitivity
value=6
0004: Channel 1 persons only (medium), channel 2
vehicles only (medium)
0005: Channel 1 all settings, channel 2 without cross
traffic (medium)
0006: Channel 1 all settings, channel 2 with detecting
slowly moving objects
This Parameter shows the serial number of the Motion
detector.
MWD_BPC-H-HU_ver4_Manual_rev0_mul
MWD BPC-H / MWD BPC-HU