Technical Description; Specifications; Technical Data - FEIG Electronic MWD BPC-H Mode D'emploi

EN
3

Technical description

3.1 Specifications

The MWD BPC-H/-HU Radar Motion Detector operates with a planar microwave antenna and is used on
industrial gates for entry and access recognition.
The device is intended for installation indoors and outdoors and is preset for typical gate applications.
The operation and parameter selection are made via the display of the connected door controller.
channels of the motion detector can be adjusted separately. The approach sensitivity and the direction logic can
be adjusted. The detector can also distinguish between people and vehicles and suppress cross-traffic.

3.2 Technical Data

Table 1: Technical Data
Case dimensions (W x H x D)
Material
Weight with retaining bracket
Protection class
Supply voltage
Power consumption
Permissible operating
temperature
Storage temperature
Relative humidity
Frequency
Transmission power
Maximum mounting height
Interface
Connection cable
FEIG ELECTRONIC GmbH
Technical description
135 x 65 x 130 mm [5.315 x 2.559 x 5.118 inch]
Case and retaining bracket: ASA
Cover: PC
160 g
IP65
12-27 V AC, 50 – 60 Hz
12-30 V DC, GND must be connected to PE.
SELV, limited capacity power source according to EN 60950-1
typ. 0.8 W
max. 1.2 W
-20 °C up to +55 °C [-4 °F up to +131 °F]
-30 °C up to +75 °C [-22 °F up to +167 °F]
< 95% non-condensing
MWD BPC-H
24.150 – 24.250 GHz
typ. 16 dBm
max. 20 dBm
7 m
CAN, 125 kBaud
M8-Snap-In-Plug (4-pole)
M8-Snap-In-Socket (4-pole)
34/74
MWD BPC-H / MWD BPC-HU
MWD BPC-HU
24.075 – 24.175 GHz
MWD_BPC-H-HU_ver4_Manual_rev0_mul
The two