Fundamental Safety Information; Observe The Information In The Operating Instructions; Staff Training; Transport And Storage - KERN 572-30 Mode D'emploi

4

Fundamental safety information

4.1 Observe the information in the operating instructions

4.2 Staff training

The device may only be operated and looked after by trained members of staff.
5

Transport and storage

5.1 Acceptance check

Please check the packaging immediately upon delivery and the device during unpacking
for any visible signs of external damage.
In the case of visible damages please obtain a signature from the bearer to serve as con-
firmation of damage. Do not make alterations to the goods and packaging, do not remove
any consignment parts. Report the damage to the parcel service immediately in writing (
within 24 hours).

5.2 Packaging

Please retain all parts of the original packaging in case it should be necessary to return
items at any time.
Only the original packaging should be used for return consignments.
Before despatch, disconnect all attached cables and loose/movable parts, remove weigh-
ing plate.
Apply any intended transport security devices. Secure all parts, e.g. glass windshield,
weighing plate, power unit etc., to prevent slipping and damage.
24
Carefully read this operation manual before setup and com-
missioning, even if you are already familiar with KERN balanc-
es.
Versions in other languages are non-binding translations.
The only binding version is the original document in German.
572/573/KB/DS/FKB/KBJ-BA-e-1774