Milk Frother - SEVERIN SM 9685 Mode D'emploi

GB

Milk frother

Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations. Make sure that the
supply voltage corresponds with the voltage
marked on the rating label of the appliance.
This product complies with all binding CE
labelling directives.
Familiarisation
1. Base
2. Milk container
3. Lid with insert
4. Handle
5. Temperature selection display
6. Temperature selection button
7. On/Off switch
8. Power cord and storage (on underside
of appliance
9. Stirring head - smooth (for heating milk)
10. Stirring head - serrated (for frothing
milk)
Important safety instructions
∙ In order to avoid hazards, and to
comply with safety requirements,
repairs to this electrical appliance or
its power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
∙ Before cleaning the appliance,
ensure it is disconnected from the
power supply and has cooled down
completely. For detailed information
on cleaning the appliance, please
refer to the section Cleaning and
care.
∙ To avoid the risk of electric shock, do
not clean the appliance with liquids
or immerse it.
∙ Caution: The milk container heats
up during operation and will remain
hot some time afterwards. Do not
touch hot surfaces.
∙ Hold the container only by its handle.
∙ This appliance is intended for
domestic or similar applications, such
as the
- staff kitchens in shops, offi ces and
other similar working environments,
- agricultural working environments,
- by customers in hotels, motels etc.
and similar accommodation,
- in bed-and breakfast type
environments.
9