Maintenance Intervals - Abicor Binzel ABITIG MT Mode D'emploi

10 Troubleshooting

9.1 Maintenance intervals

10 Troubleshooting
EN - 18
NOTICE
• The maintenance intervals given are standard values and refer to single-
shift operation.
We recommend basic cleaning once a week. The type and frequency of
cleaning shall be determined and established by the system operator of the
welding system.
DANGER
Risk of injury and machine damage when handled by
unauthorized persons
Incorrect repair work and changes of the product may lead to significant
injuries and machine damage. The product warranty will be rendered invalid
if the unit is handled by unauthorized persons.
• Operating, maintenance, cleaning and repair work may only be carried
out by qualified personnel (in Germany see TRBS 1203).
Please observe the attached document "Warranty". In the event of any doubts
and/or problems, please contact your retailer or the manufacturer.
NOTICE
• As the TIG welding torch is integrated into a welding system, the
operating instructions of the welding components, such as welding torch
and welding power supply, must be observed during operation.
®
ABITIG MT