Bresser 70-04403 Mode D'emploi page 31

using the snooze function
1. If no button is pressed during the alarm period, the
alarm will turn off automatically. Press the SNOOZE/
LIGHT button (Fig. 1, 5) during the alarm to stop the
current alarm sound and enter snooze mode. The Bell
icon will continue to flash.
2. Once the snooze function is turned on, the 4-step
crescendo alarm will sound in a 5-minute interval. The
alarm duration is approx. 120 seconds.
3. The snooze function won't stop unless you press
ALARM SET button (Fig. 1, 6) to turn off the alarm and
snooze.
Weather forecast
The built-in barometer can notice atmospheric pressure
changes. Based on the data collected, it can predict the
weather conditions for the forthcoming 12-24 hours.
Note: The accuracy of a general pressure-based weather
forecast is about 70% to 75%. The weather forecast
is meant for the forthcoming 12-24 hours. It may not
necessarily reflect the current situation.
Displaying channels
1. The defaulted displayed channel is channel 1. In normal
mode, press CH+ button (Fig. 1, 7) to check the outdoor
temperature from the different channels.
2. Press and hold CH+ button for approx. 2 seconds
to turn to channel auto-change mode that the channels
change automatically.
3. Press CH+ button again to return to normal mode.
Note: In channel auto-change mode, channels change
automatically every 4 seconds.
DE
GB
FR
NL
ES
IT
31