Remote Sensor - Bresser 70-04403 Mode D'emploi

Remote sensor

LED indicator (Fig. 2, 21)
Flashes when the remote sensor transmitting a signal.
channel switch (Fig. 2, 26)
Slide to position 1, 2 or 3.
RESET button (Fig. 2, 25)
In case of malfunction, press it by using a metal pin to
reset the remote sensor.
Wall-mount holder (Fig. 2, 22)
Use it to support the remote sensor on the wall with a
suitable hook.
28
SETTING AND DISPLAY
Automatically setting time and date.
Display of signal strength
The signal indicator displays signal strength in 4 levels.
When the symbol flashes the
received. The signal quality could be classified into 4
types:
No signal
Weak signal
Acceptable signal
Good signal
The time sync symbol will permanently
the time signal has been received. Otherwise the symbol
will turn off.
time signal is being
light up after