Using The Ac Adapter - Gima 32902 Manuel De L'utilisateur

59
Note
Dispose of the exhausted batteries according to applicable local regulations about environmental.

5.2 Using the AC Adapter

1. Connect the device and the AC adapter. Insert the AC adapter plug into the AC adapter socket on the
right side of the device.
2. Please insert the power plug of AC adapter into the 100V- 240V socket.
Note
• Hold and pull the Housing to remove the AC Adapter from the electrical outlet. Do not remove
by pulling on the cord.
• Remove the AC Adapter plug from the unit.
Please be sure to use dedicated AC adapter.
Note
You'd better take off batteries when use the AC adapter as power source. If there is any damage
to the AC adapter, you should use batteries to run the device.
When adapter and batteries are both used at the same time, the battery power will not be
consumed. Switch adapter and battery as power supply when the device is off, otherwise,
the device may shutdown due to power failure.
ENGLISH ENGLISH