On/Off Switch; Power Setting; Eco Mode - Domo DO7344H Mode D'emploi

USE
Before you use the appliance: plug in the appliance and turn on the on/off switch at the back of the device.
The heater is now in stand-by mode. You can set the appliance using the control panel, but also using
the remote control. You can make the settings in the same way. The display will show you the selected
settings.

ON/OFF SWITCH

Push the on/off switch to turn on or off the appliance. A signal will indicate that the appliance is operating.
After switching off, the appliance will cool itself for a while. The heater remembers the last settings made.
So when you switch on the device again, the last made settings will appear on the display.

POWER SETTING

· Push once the button: high power: 2500 W
· Push twice the button: low power: 1500 W
SETTINGS
Timer
1. Push once this button to set the timer.
2. The timer can be set between 1 and 12 hours. Use the + and - button to select the desired time. By
pressing the + or - button you set the time with one hour more or less. You can also press and hold
this button until you reach the desired setting.
3. When the selected time has been expired, the appliance will enter the stand-by mode and will no
longer emit heat.
Temperature
1. Press twice this button to set the temperature.
2. Temperature can be set between 5°C and 35°C. Use the + and - button to select the desired
temperature. By pressing the + or - button you set the temperature one degree higher or lower. You
can also press and hold this button until you reach the desired setting.
If you have set the timer and temperature, press the settings button a third time. Now, the display will
show the ambient temperature. Now the settings are fixed and you can not adjust them unless you push
this button again to set the timer or temperature.
Note: if both the timer and temperature are set, both settings will appear alternately on the display.

ECO MODE

Push this button to enter eco mode. This function ensures that the set temperature will be maintained in
an as energy-efficient way as possible.
· If the ambient temperature is maximum 2°C lower than the set temperature, the appliance will make
sure that the set temperature is reached at the lower power of 1500 W.
· If the ambient temperature is more than 2°C lower than the set temperature, the appliance will make
sure that the set temperature is reached at the higher power of 2500 W.
If the temperature is reached, the appliance will enter the stand-by mode. If the temperature is
decreasing again, the appliance will re-enter the eco-mode.
www.domo-elektro.be
27
DO7344H