Performance Description; Intended Use; Foreseeable Misuse; Disclaimer - BWT Infinity A 3/4" Instructions De Montage

EN
4

Performance description

4.1

Intended use

The Infinity backwash filters are used for filtration
of drinking and industrial water to protect the wa-
ter mains and the connected fittings, equipment,
machinery, tanks, boilers and production facilities
from malfunction and corrosion damage caused
by foreign particles.
The filters can also be used for filtration of well,
process, boiler feed, cooling and air conditioning
water. In these cases, advice must be obtained
from a specialist.
The filters are unsuitable for oils, greases, solvents,
soaps and other lubricating media. Water-soluble
substances also cannot be separated off.
The intended use presupposes that the filter is in-
stalled, operated and maintained according to the
instructions and regulations of this documentation.
4.2

Foreseeable misuse

Operating the system with parameters other than
those specified in this documentation and in sec-
tion 4.1.
Not adhering to the prescribed maintenance and
service intervals.
Using spare parts and consumables not approved
by BWT.
4.3

Disclaimer

The manufacturer is released from any liability if the
customer intentionally or forcibly removes guards
or safety devices, if the customer wilfully modifies
or circumvents the same, or if the customer does
not follow the instructions in this operating manual
or on the system.
4.4

Other applicable documentation

Observe all documents from suppliers that were
included with delivery. These are considered part
of this documentation and must not be changed
or removed.
22