About This Documentation; Validity Of This Documentation; Depiction Of Safety Advice; Symbols Used - BWT Infinity A 3/4" Instructions De Montage

EN
1

About This Documentation

1.1

Validity of this documentation

This documentation is valid for the following
product:
Infinity A / AP backwash filter
This documentation is intended for operators,
end users, installation technicians not trained
by BWT, installation technicians trained by BWT
(e.g. drinking water specialists) and BWT service
technicians.
This documentation contains important information
about how to safely and properly install the pro-
duct, how to start up, operate, use, maintain and
dismantle the product as well as how to remedy
simple faults on your own.
Please read this documentation in its entirety before
working with the product, especially section 2,
Safety Instructions, on page 21.
1.2

Depiction of safety advice

In this document safety instructions are followed
by a sequence of actions, that could cause harm
to persons or damage to property. All hazard pre-
vention measures must be kept.
Safety instructions are displayed in the following
way:
SIGNAL WORD!
Source of hazard
(i.e. high voltage)
Type of hazard
(i. e. risk of death!)
► Escape or prevent hazard
► Rescue measure (optional)
Signal word
Warning sign
Source / type of
hazard
Consequence
Measures
20
Indicates the severity of hazard
Indicates hazard
Indicates source / type of
hazard
Explains consequences of
hazard
Indicates measures to avoid
hazard
Signal word Severity of hazard
DANGER High risk of hazard.
Indicates an hazardous situation
which, if not avoided, will result
in death or serious injury.
WARNING Medium risk of hazard.
Indicates an hazardous situation
which, if not avoided, could
result in death or serious injury.
CAUTION Low risk of hazard.
Indicates an hazardous situation
which, if not avoided, may re-
sult in minor or moderate injury.
1.3

Symbols used

This symbol indicates general
hazards for people, machines or
the environment.
This symbol indicates that the
product can be recycled after it is
decommissioned.