Parts And Controls - Beurer MG 153 Mode D'emploi

4. Parts and Controls

2
3
4
5
9
6
5. To Use
1. Remove all parts from the packaging and inspect for damage.
2. Connect the Power Adapter to the Power Cord on the massager and route it so that it will not be tripped
over or pulled.
3. Press the body area to be treated carefully against the massager and check that the massage position
is comfortable for you. The massage should feel pleasant and relaxing at all times. If the massage is
painful or uncomfortable, stop the massage or change the pillow's position or the contact pressure.
Do not trap or squeeze any part of your body, especially feet, hands, and fingers, between the rotating
massage heads and their mounts.
4. Press the On/Off Button to switch the massager on; the massage heads will start to rotate and the
pinch nodes will move up and down. Press the Rotation Selector Button again to change the direction
of rotation.
5. Press the Heat Button to activate the heat function; press the Heat Button again to cancel.
6. Press the On/Off Button again to shut the massager off.
1
7
Neck massage:
• Place massager around your neck.
• Adjust pressure using the handles
Lower Back Massage
• Place massager around hips
• Adjust pressure using the handles
1. Massage Heads (4 massage heads,
2 heated pinch nodes)
10
2. Control Panel
3. On/Off Button
4. Rotation Selector Button
5. Intensity Selector Button
6. Heat Button
7. Handles
8. Power Adapter
8
9. Power Cord
10. Removable Washable Cover
5