ABUS Security-Center eyseo TV7000 Instructions D'installation page 13

The ECOLINE colour cameras are equipped
with an IR cut and cannot be used in
combination with IR illumination. Perfect colour
video pictures depend a great deal on the
lighting. Please take this into account when
installing artificial light sources. Light sources
with a colour temperature different from daylight
may effect colour drifts in colour cameras.
The cause of bad picture quality goes hand in
hand with improper cabling. Ensure
professional installation and avoid passive
video distributors. Always select the shortest
distance between the camera and the next
video unit.
6. Operating controls and functions
1
2
3
AES
OFF
4
(1) Video output connector (VIDEO OUT)
This connector is for connecting the camera
video signal to the VIDEO IN of the monitor, for
example (composite signal: 1Vp-p).
(2) Lens drive level control
This allows you to adjust the aperture level of
an auto-iris lens when the lens drive signal
selector is set to DC and an auto-iris lens
requiring the DC drive signal is mounted on the
camera. Note: the lens drive level control
should be adjusted by the lens when the auto-
iris lens connected to the camera requires the
video drive signal.
8
Video
Power LED
Out
Level
AI/MI
BLC
12V
230V~
5
3
1
Video Dr.
4
2
DC Drive
13
7
6