Privacy - Monacor TVCCD-187HCOL Mode D'emploi

and in the line BAUDRATE, adjust the transmission rate (9600 bps,
19 200 bps or 38 400 bps) of the controller.

6.8.5 PRIVACY

OFF privacy masking deactivated
ON↵ privacy masking activated
When the privacy masking is activated, four rectangular masking areas
(AREA1 to AREA4), adjustable separately, will be available to mask
image areas not to be monitored:
1
3
When ON↵ is selected, press the button SET to go to the next submenu
PRIVACY:
PRIVACY
AREA SEL
AREA STATE
AREA TONE
TOP
DOWN
LEFT
RIGHT
Press SET to Return
In the line AREA TONE, select the desired shade for all four masking
areas together: from 1 (black) to 100 (light grey). Then adjust each
masking area separately:
1) In the line AREA SEL, select the masking area to be adjusted.
2) In the line AREA STATE, activate (ON) or deactivate (OFF) the area
selected.
3) Define the size and the position of the area selected by displacing
its edges (TOP, DOWN, LEFT, RIGHT).
2
4
AREA1
ON
8O
1O
25
2O
4O
GB
29