Technical Data - BEHA UNITEST ISO-compact Mode D'emploi

Z
Please consider your environment when you dispose of your
one-way batteries or accumulators. They belong in a rubbish
dump for hazardous waste. In most cases, the batteries can
be returned to their point of sale.
Please, comply with the respective valid regualtion regarding
the return, recycling and disposal of used batteries and
accumulators.
If an instrument is not used over an extended time period,
the batteries must be removed. Should the instrument be
contaminated by leaking battery cells, the instrument has to
be returned for cleaning and inspection to the factor.
If the symbol "battery" appears in the display, replace the discharged
battery.
' Disconnect the ISO-Compact from all measurement circuits.
' Wait until instrument switches off automatically.
' Open the battery case by lifting it with a screw driver or similar.
' Remove discharged battery.
' Insert new 9 V battery, type IEC 6LR61, by respecting correct
polarity. Close the battery case.
Now you may continue the measurements.
Calibration Interval
The instrument has to be periodically calibrated by our service de-
partement in order to ensure the specified accuracy of measurement
results. We recommend a calibration interval of one years.

6.0 Technical Data

(for 23°C5 5°, < 70% rel. humidity)
Display:
Measurement rate:
Voltage ranges:
Frequency:
Operating time:
Current at switch-on:
Test current:
18
1
3 / digit, digitale LCD with symbols
2
for measurement range, unit and
low battery, with background lighting
approx. 3 measurements per second
20...700 V / 1 V resolution DC and
AC voltage
0 ... 400 Hz
30 s
approx. 450 mA
approx. 15 mA for 700 V