Control Elements And Connections; Measurements - BEHA UNITEST ISO-compact Mode D'emploi

When modifying or changing the instrument, the operational
safety is no longer ensured.
The instrument may only be opened by an authorised service
technician, e.g. for fuse replacement.
The Scope of Supply comprises:
1. UNITEST ISO-Compact;
2. Battery (installed)
3. Instruction manual
Please refer to our main UNITEST catalogue for further accessories
such as test leads, test probes, clamps etc.

3.0 Control Elements and Connections

4.0 Measurements

Z
(Acceptance) measurements are to be carried out complying
to the respectively valid standards.
Measurements in dangerous proximity of electrical installa-
tions are only to be executed when instructed by a respon-
sible electrical specialist, and never alone.
1. Handle test probe
2. Instrument test probe
3. LCD with symbols for units,
AC/DC, low battery...
4. Button "Voltage Test" activates
the voltage measurement
function.
5. Button "Insulatet-Test" activates
the insulation test with a test
voltage of 500 V. Repeated
actioning enables selection
between both measurement
ranges 0...20 MV and 0...200
MV um.
6. Button "Battery Test" tests the
battery and indicates the
battery voltage in V.
7. Battery case (rear of the
instrument).
14