Settings Page - Teuco VASCHE Manuel D'utilisation

EN

SETTInGS PAGE

SETTINGS icon
SOFTWARE icon
TEMPERATURE icon
TECHNICAL SERVICE MENU icon
(only accessible to authorised Teuco
technicians)
Touch the SETTINGS icon on the HOME screen to
access the SETTINGS PAGE control panel.
Software versions
To see information about the SOFTWARE versions
of the electronic devices installed, touch the related
icon.
The information is displayed in the form of a list.
Should there be more than four rows, touch the
SOFTWARE icon to display subsequent ones.
Temperature setting
The settings page envisages the setting of the
temperature display, which is either in degrees
Celsius (°C) or Fahrenheit (°F) and the calibration
of the temperature itself, which can be adjusted
with a comparative thermometer.
To modify the unit of measure, touch the "°C" icon.
To correct the reading of the sensor, select the
TEMPERATURE icon and adjust the value using
the "Ʌ" or "V" key.
n.B.: The temperature value displayed has
an admissible error of 2°C.
n.B.: The temperature can only be modified
with the whirlpool switched off.
34