Transport; Storage; Disposal; Fuel Tank & Filter Valve (Every 150 Hours) - Zipper Maschinen ZI-STE2800 Mode D'emploi

 The gasket ring should be in a good condition.
 When the spark plug gets changed you must screw it in with your
hands. When you can't turn it any more you have to use the spark
plug wrench to fasten it with half an round.
15.1.4 Fuel Tank & Filter Valve (every 150 hours)
 fuel cock lever to "OFF"
 In solution (with mild detergent)
 clean all parts.
 Put back together.
 Remove the engine tank filter
 In solution, clean (with mild detergent).
 Replanting.

Transport

 Let the machine get cold for 15 minutes.
 Do not lay the machine on the side during the transport. Oil or fuel leakage.
 Do not lay heavy or wet things onto the generator during transportation.

Storage

If the machine is not used for a longer period of time (>30 days):
1. Empty the oil tanks or fuel tank.
2. Remove the spark plug and pour a few drops of engine oil into the cylinder. Using a
rope starter, turn the engine a few times so that the oil is well distributed inside the
cylinder. Clean the spark plug and replace it.
3. Cover the cooled machine and store it out of the reach of children and unauthorised
persons in a well-ventilated, dry and frost-free environment.
16

DISPOSAL

Do not dispose of your machine in residual waste. Contact your local authorities for
information on available disposal options. If you buy a new vibratory plate or equivalent
from your dealer, he is obliged in certain countries to dispose of your old machine
properly.
ZIPPER MASCHINEN GmbH
ZI-STE2800; ZI-STE5500; ZI-STE800; ZI-STE8004
www.Zipper-Maschinen.at
DISPOSAL
43