TFA Mondo 35.1151 Mode D'emploi page 14

TFA_No. 35.1151_Anleitung 16.08.2018
MONDO – Wireless weather station
• If necessary adjust the second alarm time in the same way.
• Press the ALARM button in normal mode, to activate or deactivate the corresponding alarm function.
• The alarm symbol (AL1/AL2) appears/disappears on the display.
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached. The alarm symbol flashes.
• Press any button to stop the alarm.
• If the alarm is not stopped manually, the alarm tone automatically turns off after two minutes and will be reactivated at the
same set time in the following day.
• The alarm symbol remains on the display.
• When the alarm rings, press the SNOOZE/LIGHT button and the snooze function is activated.
• Zz appears and the alarm will be interrupted for the set time.
• Press any button to turn off the snooze function.
• The Zz symbol disappears.
9.1 Setting of the snooze interval
• Press and hold the SNOOZE/LIGHT button in normal mode for three seconds, to enter the setting mode.
• 05 (default) or the last adjusted snooze interval appear on the display.
• Press the UP or DOWN button to adjust the minutes (3-20) for the snooze function.
• Confirm the setting with the MODE button.
10. Trend arrows
• The trend arrows indicate whether the values for temperature are currently increasing, steady or decreasing.
11. Weather forecast symbols
• There are 6 different weather symbols (sunny, slightly cloudy, cloudy, rainy, stormy and snowy).
• The weather forecast relates to a range of 12 to 24 hours and indicates only a general weather trend. For example, if the
current weather is cloudy and the rain symbol is displayed, it does not mean the product is faulty because it is not raining.
It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rain.
• The sun symbol also appears on a starry night.
12. Setting of the outdoor and indoor temperature alarm
• Press the ALERTS button in normal mode.
• HI and 70 °C (default) or the last adjusted upper temperature limit appear on the display.
26
15:06 Uhr Seite 14
MONDO – Wireless weather station
• Press and hold the ALERTS button.
• The temperature display flashes.
• Press the UP or DOWN button to set the desired upper limit.
• Confirm with the ALERTS button.
• LO and -40°C (default) or the last adjusted lower temperature limit appear on the display.
• The temperature display flashes.
• Press the UP or DOWN button to set the desired lower limit.
• Confirm with the ALERTS button.
• Set the upper and lower limit for the indoor temperature in the same way.
Measuring range: 0°C ....+50°C
12.1 Activate and deactivate the outdoor and indoor temperature alarm
• Press the ALERTS button in normal mode.
• HI and the last adjusted upper temperature limit is indicated.
• Press the UP or DOWN button to activate or deactivate the alarm function.
• The alarm symbol appears/disappears next to HI.
• Press the ALERTS button to navigate to further alert functions and to return to normal mode.
12.2 In case of alarm
• In the case of an alarm, the corresponding value will be flashing. The alarm tone will sound again for 4 seconds in every
minute.
• Stop the alarm tone with any button.
13. Positioning and mounting of the base station and the transmitter
• With the foldable leg at the back, the base station can be placed onto any flat surface.
• With the wall mount holes at the back, the base station can be wall mounted at the respective location. Make sure you
avoid the vicinity of any source of interference such as computer screens, TV sets or solid metal objects.
• The outdoor transmitter can be placed onto any flat surface or wall mounted at the respective location by the hanging hole
at the back of the unit. When placed outdoors, choose a shady and dry place for the transmitter. Direct sunlight may trigger
incorrect measurement and continuous humidity damages the electronic components needlessly.
27