Diagram - Philips HeartStart FR3 Manuel D'installation, D'utilisation Et De Maintenance

A
Defibrillator pads connector
socket. Receptacle for the defibrillator pads
cable connector. A light on the socket
flashes when the FR3 is turned on to show
socket location.
B
Green On/Off button. Turns on the
FR3 and starts voice and text prompts. A
second press brings up the status screen,
and then turns off the FR3.
C
Green Ready light. Shows the
readiness status of the FR3.
D
Microphone. Used optionally to
record audio during an incident.
E
Infant/Child Key port.
Accommodates the optional FR3
Infant/Child Key accessory to enable
pediatric treatment protocols for patients
under 55 lbs (25 kg) or 8 years old.
4
I
A
B
C
D
E
F
G
H
Diagram: The HeartStart FR3 Defibrillator
F
Screen. Displays text prompts,
graphics, and incident data. The FR3 ECG
model also displays the patient's ECG if
enabled.
G
Option buttons (three). When
pressed, activates the function identified on
the screen.
H
Orange Shock button. Controls
shock delivery. The button flashes when the
FR3 is ready to deliver a shock.
I
SMART Pads III. Self-adhesive pads
supplied with attached cable and connector.
If using an optional FR3 system case and/or
the Pads Sentry, store pads in Pads Sentry
and pre-connect pads to FR3 for automatic
self-test.
J
Battery. Battery used to power
the FR3.
J
K
L
M
N
O
P
K
Battery compartment. Provides
electrical connection for installed battery
and contains data card slot and Bluetooth®
wireless technology transceiver module
compartment.
L
Data card slot. Receptacle for
optional data card accessory. Located
beneath the battery in the battery
compartment.
M
Bluetooth wireless technology
transceiver module compartment.
Accommodates optional transceiver module
accessory. Located behind a removable door
in battery compartment.
N
Speaker. Broadcasts FR3 voice
prompts and alert tones when appropriate.
O
Beeper. Broadcasts FR3 alert chirps
when appropriate.
P
Accessory port. Connection port for
future use.