Factory Settings; Test Function - Rechner Sensors TRUE LEVEL Notice D'utilisation

Control and Display Elements of the EasyTeach-Foil

Factory Settings

The probe is delivered with the following adjustments
• Analogue output 4...20 mA or 0...10 V dependent on the ordered variant.
• Binary output as Normally open
• Damping of the output with tier 2 (25 % LED)
EasyTeach-Philosophy
t = 0
5s Adjustment „empty"
10s
15s
20s
>25s
22
Menu item
Inversion
binary output
Inversion
analogue output
Reset

Test function

Level indicator with 5 LEDs
Adjustment with EasyTeach-Button (ETF):
Pushing the EasyTeach-Button activates the
EasyTeach menu. The desired menu item is se-
lected by releasing the EasyTeach-Button after the
specified time.
Adjustment with EasyTeach by Wire (ETW):
The EasyTeach menu starts, by activating the
EasyTeach connection (Teach wire / Teach pin with
the supply voltage UB+).The desired Menu point is
selected when breaking the connection at the de-
fined time.
After making the adjustment put the
EasyTeach wire (pin 5) on GND of the
i
supply voltage (U
tentional adjustments on the device.
EasyTeach-Button
-). This prevents unin-
B