1- Warnings; 2- Alarms - BSV BSsalt-10 Manuel De L'utilisateur

Excess Salt
Lack of Salt
No water flow
Overload

4.3.1- Warnings

Message:
"LACK OF SALT"
"EXCESS SALT"

4.3.2- Alarms

"NO WATER
FLOW"
Manual EVO v.3
Causes:
Lack of salt in the water.
Incrustations or objects in
the electrolysis cell causing
excess current.
The electrolysis cell
worn.
Excess salt in the water.
Incrustations or objects in
the electrolysis cell causing
excess current.
Excess gas in
electrolysis cell. It may be
because the pump
shutdown. The gas
hydrogen gas which
highly flammable.
Sensor cable of the cell is
incorrectly connected
broken.
Action required:
Add salt to the swimming
pool.
Clean the cell.
is Replace the electrolysis cell
with a new one.
No action required if excess
is not very significant.
Clean the cell.
the The piping
drained to eliminate gas or
has accumulated water. Check
is the pump.
is
Check the sensor cable
or (white cable)
should be
84 / 142