2- Main Screen; 3- Main Menu - BSV BSsalt-10 Manuel De L'utilisateur

4.2.2- Main screen

On starting up the equipment, a screen will be displayed with the main
parameters.
- The upper line displays the production %, the voltage of the electrolysis
cell and the water temperature consecutively.(If you do not have a
temperature probe, --- º will appear).
- The second line displays the oxidation /reduction potential called RedOx
or ORP (Oxidation Reduction Potential) or ppm if working with a free
chlorine probe. "Man.", "Auto" or "Semi-auto" is displayed on the right.
- Important: If you do not have a RedOx probe or a free chlorine probe,
the ORP reading displayed may be a random value. When selecting the
Manual mode (this mode is required if it is to operate without a probe),
the equipment will ask if you want to display the ORP line or to conceal
it.
- The third line displays the pH reading as long as it is fitted in the
equipment (EVO model) and the relay status.
- The fourth line displays the Menu (press the OK button to access the
menu) and the time on the clock. If any alarm or warning occurs, it will
also be displayed on this line.

4.2.3- Main menu

Press the "OK" button from the main screen to access the main menu.
Using the buttons   you can select a line of the menu, indicated by the
arrow (). The OK button is used to confirm the selection.
Manual EVO v.3
73 / 142