4- Configuration - BSV BSsalt-10 Manuel De L'utilisateur

To access the configuration menu, you need to confirm the operation by
selecting (S) through the arrow, and pressing OK.

4.2.4- Configuration

In the configuration menu you can select the configuration parameters, which
usually only have to be adjusted when installing the equipment.
4.2.4.1- Change of language
From the configuration menu select "Language", press the OK button, and once
the required language has been selected, press the OK button and EXIT.
4.2.4.2- Control
The equipment allows you to select from 4 different modes of control:
Manual: The equipment produces chlorine continuously, depending on the
% of production selected. If you have a fitted ADVANCED probe Kit probe, it
will ignore its value and chlorination will not stop even though the set value has
been exceeded. When selecting this mode, the equipment will ask if you want
to display the value of the Redox probe (ORP) on the main screen.
74 / 142
Manual EVO v.3