Evo Series Equipment; 1- Operation; Configuration Menu - BSV BSsalt-10 Manuel De L'utilisateur

4.2- EVO series equipment

4.2.1- Operation

The EVO series equipment has an LCD screen, in which you can view and
configure all operations of the equipment. The following table shows how to
organize the configuration menu of the equipment:
Chlorinating Menu:
Main menu
Configuration
Chlorination
pH
Relay
Clock

Configuration menu

Language
Control
Cell cleaning cycle
Acid /Alkaline
pH min
pH max.
pH Alarm (S)N
ORP min
ORP max
Volume of swimming pool in m2
Indoor or outdoor swimming pool
Swimming pool cover (NO)NC
Flow switch (N)S
When browsing through the menus, an arrow is displayed on the left hand side
 which indicates the selected line.
When there is more than one line to select, the buttons   enable you to
move the arrow up or down to select the required option. The OK button
confirms selection.
When a value has to be adjusted, for example the time or level of chlorine, the
buttons   enable you to increase or decrease the value. Press the OK
button to confirm the value.
Manual EVO v.3
Chlorination menu
% of production
Max ORP
Super chlorination
Calibration of free chlorine probe
pH menu
pH +/- (set point value)
Probe calibration
Manual pump priming
On/Off pH
Relay menu
On/Off (START/STOP)
Time (in minutes)
Programme 1
Programme 2
OFF Programme
Clock menu
Clock (time setting)
72 / 142