5- Chlorine Menu - BSV BSsalt-10 Manuel De L'utilisateur

4.2.4.9- Flow switch
The flow sensor detects whether or not there is water flow in the piping. If it
detects that there is no flow, the equipment will stop and an alarm will sound
accompanied by a red warning LED. Once the flow has been reestablished, the
equipment will return to normal operation.
The "Flow Kit" (optional) is necessary to activate the flow sensor, which is
done by pressing OK in the menu.

4.2.5- Chlorine menu

With this menu you can select all parameters related to chlorine production.
4.2.5.1- Production of cl.
Configuration of the maximum production of chlorine.
From 0% to 100% Press "OK" and use the arrows   to change the value.
Press "OK" to confirm the adjustment.
Note: Chlorine production may be limited regardless of the operation mode
(manual, automatic...) that is selected.
4.2.5.2- Adjustment of the set value (Max. ORP or Max. PPM)
ORP Mode in which a Redox probe (OPTIONAL) is installed.
78 / 142
Manual EVO v.3