Technical Specifications; Recommendations And Safety Precautions - BSV BSsalt-10 Manuel De L'utilisateur

1.3- Technical specifications

1.3.1 Equipment
BSsalt-10
Modelos
EVoBasic-10
Supply 230Vac
voltage 50/60Hz
Chlorine
production 10
g/hour
Max. power 75W
Cell current 10A
280x250
Dimensions
X135mm
Weight 4Kg
Protection IP65
1.3.2 Common features in all EVO equipment
- Adjustment of chlorine production by switched mode power supply
- Power supply performance >90%
- Automatic switch-off owing to lack of water flow
- Automatic switch-off owing to the accumulation of gas in the cell, with
automatic restart once the water flow is restored.
- Automatic voltage adjustment depending on the concentration of salt and
the temperature, keeping continuous chlorine production.
- Automatic cleaning cycle of electrodes.
- Automatic restart in the event of supply failure.

1.4- Recommendations and safety precautions

- The equipment should always be installed by qualified staff.
- Disconnect the equipment from the mains before performing any
assembly or maintenance operation.
- Make sure that the electrical installation has all compulsory
protection elements (circuit breaker and differential switch) in
perfect condition.
- It is important to ensure that the supply cables of the
electrolysis cell are tightly connected, otherwise the
equipment could overheat and break down.
Manual EVO v.3
BSsalt-15
BSsalt-20
EVoBasic-15
EVoBasic-20
EVoMg-15
230Vac 230Vac
50/60Hz 50/60Hz
15 20
112.5W 150W
15A 20A
280x250 280x250
X135mm X135mm
4Kg 4Kg
IP65 IP65
BSsalt-25 BSsalt-35
EVoBasic25 EVoBasic-35
EVoMg-25 EVoMg-35
EVoBASIC15LS EVoBASIC20LS
230Vac 230Vac
50/60Hz 50/60Hz
25
187.5W
25A
280x250 280x250
X135mm X135mm
4Kg
IP65
53 / 142
35
263W
35A
4Kg
IP65